How do I fix error code E HS on my LG LRFGC2706S?

1. undefined: Check connector between Main PCB and humidity sensor for loose connection. 2. undefined: Measure sensor resistance. Replace if shorted or open. 3. undefined: If sensor is good, replace Main PCB.

LG LRFGC2706SRefrigerator

Error Code E HS

Humidity sensor error — short-circuit or disconnection of humidity sensor

Moderate

Address soon - your appliance may not work properly

Also displayed as: E HS

How to Fix

1
Check connector between Main PCB and humidity sensor for loose connection.
2
Measure sensor resistance. Replace if shorted or open.
3
If sensor is good, replace Main PCB.

Other Error Codes for LRFGC2706S

E IS

Freezer icemaker sensor error — short-circuit or disconnection of ice maker sensor

E It

Freezer ice maker kit defect — malfunction of ice maker motor

E rS

Refrigerator sensor error — short-circuit or disconnection of refrigerator sensor

E FS

Freezer sensor error — short-circuit or disconnection of freezer sensor

F dS

Defrost sensor error — short-circuit or disconnection of freezer defrost sensor

F dH

Defrost heater error — defrost sensor did not reach 40°F (5°C) within 80 minutes after defrost start

E FF

Freezer BLDC fan motor error — no feedback signal from fan motor for more than 65 seconds

E CF

Condenser (machine room) BLDC fan motor error — no feedback signal for more than 65 seconds

Need more help with your LG LRFGC2706S?